CCS BV 24 Months Warranty period / Pneumatic Rubber Fender /
Pneumatic Boat Fender
1. Company Profile
Qingdao Henger Shipping Supplies Co., Ltd is a high-tech enterprise
integrated with manufacturing, research and innovation, technical
services, specialized in manufacturing marine products, such as
pneumatic rubber fenders, foam filled fenders, marine rubber
airbags, navigation mark, marine buoys, highway safety roller
barrier.
All products get ISO 9001-2008 certificate and IACS quality
authentication from CCS, BV, GL, ABS, LG, etc.
2. Pneumatic Rubber Fender Introduction
The Pneumatic Rubber Fender was invented in 1950s. Progress in the
development of such floating pneumatic rubber fenders is closely
related to the progress and development of ship technology, and has
to continuously cope with progressively larger oil tankers such as
VLCC's, ULCC's, large gas carriers, bulk carriers and floating
structures.
Pneumatic rubber fenders are widely used in oil tank, cargo ship,
yacht, offshore platform, big shipyard, military harbors, huge
bridge piers.
Compared to traditional solid rubber fender, pneumatic has
following advantages
1. Big energy/ impact absorption capacity, small reaction force to
ships
2. Easy and fast installation
3. Higher elasticity. It doesn’t get deformation under compression
4. Light weight
5. Economical and practical
3. Henger Yokohama Rubber Fender Advantages
1) Safety and Reliability
Henger Pneumatic Rubber Fenders are constructed of natural rubber,
several layers of strong tire-cord, and are thus resistant to
pressure and cutting. The safety factor adopted in the design of
this fender is based on accepted theory and has been proven by
extensive experimentation.
2) Patented Active Protecting Safety Valve Design
All Henger Pneumatic Rubber Fenders are equipped with a safety
valve to release the inside air in the event of accidental
over-pressure.
3) No Deterioration or Variation in Performance
Henger Pneumatic Rubber Fenders utilize the compressive elasticity
of air, therefore performance deterioration due to fatigue is
absent.
4) Advantages at Inclined Berthing
Henger Pneumatic Rubber Fenders, energy absorption does not
decrease at inclined compression up to 15 degrees.
5) Most Cost Competitive System
The utilization of the compressive elasticity of air provides
completely uniform surface pressure on contact, making Yokohama
Pneumatic Rubber Fenders ideal. The surface pressure of the
Yokohama Pneumatic Rubber Fenders is equal to the internal air
pressure.
Due to low and uniform surface pressure properties, the Yokohama
Pneumatic Rubber Fenders are popular at LNG-ship terminals. Soft
Reaction Force for Ship and Jetty Structure the reaction force of
Yokohama Pneumatic Rubber Fenders does not increase sharply, even
under excess load conditions. Therefore, the Pneumatic Rubber
Fenders perform well in such cases, and protect ships and mooring
facilities.
6) Lower Mooring Forces under Rough Weather Conditions
The reaction force and deflection of Yokohama Pneumatic Rubber
Fenders do not easily reach the maximum because the reaction force
increases slowly and allowable deflection is wide. Thus, the
Yokohama Pneumatic Rubber Fenders safely protect ships and mooring
facilities even under rough weather.
Henger Pneumatic Rubber Fender Design & Structure :
4. Henger Pneumatic Rubber Fender Structure
5. Pneumatic Rubber Fender Technical Parameter
* 1. above penumatic fenders parameter is based on of 0.05Mpa
internal pressure,there is also & 0.08Mpa type for choice, kindly
contact our service consultant for more details and competitive
prices.
* 2. penumatic fender size could be customized according to
customer requirement.
* 3. all accessorires could be customized according to customers'
requirement or drawings.
6. Yokohama Floating Pneumatic Marine Rubber Fender Model Selection
1. For Small & Middle Size Ship
| Ship Tonnage(T) | Recommendation Size D x L ( m) | Ship Type |
| 50 | 0.5 x1.0 | Fishing ship |
| 100 | 0.7 x 1.5~1.0 x 1.5 | Fishing ship |
| 200 | 1.0 x 1.5~1.2 x 2.0 | Fishing ship, towing ship |
| 300-500 | 1.2 x 2.0~1.5 x 2.5 | Fishing ship, towing ship |
| 1000 | 1.5 x 2.5~1.5 x 3.0 | Towing ship, cargo ship |
| 3000 | 2.0 x 3.0~2.0 x 3.5 | cargo ship, ocean trawler |
| 10000 | 2.0 x 3.5~2.5 x 4.0 | cargo ship |
2. For Large-tonnage Ship
Ship Tonnage (DWT) | Assumed Boarding Speed (M/S) | Effective Kinetic Energy (KN.M) | Fender Size D*L (m) |
| 200000 | 0.15 | 1890 | 3.3 x 6.5 |
| 150000 | 0.15 | 1417 | 3.3 x 6.5 |
| 100000 | 0.15 | 945 | 3.0 x 5.0 |
| 85000 | 0.17 | 1031 | 3.0 x 6.0 |
| 50000 | 0.18 | 680 | 2.5 x 5.5 |
| 40000 | 0.20 | 672 | 2.5 x 5.5 |
| 30000 | 0.22 | 609 | 2.5 x 4.0 |
| 20000 | 0.25 | 525 | 2.5 x 4.0 |
| 15000 | 0.26 | 425 | 2.5 x 4.0 |
| 10000 | 0.28 | 329 | 2.0 x 4.0 |
| 5000 | 0.33 | 228 | 2.0 x 3.5
|
7. Yokohama Floating Pneumatic Marine Rubber Fender Application
1. large crude oil carrier, VLCC
2. container vessel
3. offshore sea task platform
4. large shipyard and dock
5. large ship and cruise ship
6. army harbor dock
7. large bridge pier
8.Packing & Delivery
* all packing method and shipping method of pneumatic rubber
fenders are done as per to csutomer's requirement.
9. Other
10. FAQ
Q: What’s the material of your pneumatic fender products ?
A: the main raw materials are natural rubber, synthetic-tyre-cord
fabric and customized hardwares, etc.
Q: Are you factory or trading company ?
A: We are manufacturing factory, located in Jimo district,Qingdao
city, 1 hour drive to Qingdao port and 40 minutes drive to Qingdao
airport, which is convenient in transportation logistics.
Q: Is OEM service available ?
A: yes
Q: What’s the delivery time and payment terms ?
A: Delivery time is based on product model and order quantity.
normally it is around 7-15 working days.
The payment could paid by T/T, L/C, Western Union, Paypal, etc.
